NO2C for Speeduino v0.2.x

(1 customer review)


SKU: N/A Category:


User (me) designed board.

Up-to-date information about the board can be found on the speeduino wiki here:

Current stock is v0.2.2 or later. These PCBs are BLUE with white silkscreen.

If you order either connector kit you will get the vehicle side connector housing and the pins that go on the end of the wires and snap into it. The PCB kit comes with mating connectors that can be soldered straight to the board. The panel mount kit the main PCB (24-pin) connector is replaced with a panel mount housing and crimp pins to go in it, allowing all the connections to be at the end of the case.

Check out NO2C on the Speeduino Wiki

Assembly Tips

Additional information

Weight N/A
Dimensions 6 × 4 × 2 in

None, Without Connectors, With PCB Connectors, With Panel Connectors

Pressure Sensor

None, 115kPa, 250kPa, 400kPa


Unassembled, Assembled

1 review for NO2C for Speeduino v0.2.x

  1. Joshua Ng

    Very very well designed board, it was very fun to put together!

Add a review

Your email address will not be published. Required fields are marked *